Frictive FR305M Metal Pads for Magura MT7 | Also MT5 | Sintered | Disc Brake Pads

FR305M Metal Pads

Regular price$35.00
/

available & arrives in .-. work days

Description

FR305M Metal Pads use a metallic friction compound made from a sintered blend of high friction metal powders. The performance advantage of these pads is their consistency in all conditions including serious mud and long steep descents. If you’re a big fan of that sort of riding (we are), or are on the heavier side, metal pads are a must. Metal pads also last much longer than other compounds. FR305M Metal Pads can be used as a direct replacement for Magura MT5 & MT7 pads and other pads with the same shape.

THRIVE ON STEEPS

Metal pads will keep you stopping all day... on any slope... for months...

Metal Pads are consistent on steep descents all day
Metal Pads ride well in the wet
RIDE IN ALL CONDITIONS

Wetter might not be better, but riding always beats not riding.

Specifications

Compound
Metal
Hardware Included
2x Retaining Pins
Weight
29.3g

Frequently Asked

Each pad compound has different performance characteristics. For most riders, one of the characteristics is a dealbreaker which makes the choice easy. Here are the main dealbreakers:

A) Are you a heavy (or aggressive) rider who brakes a lot on long descents? Get Metal
B) Do you hate the feeling of on/off brakes? Get Resin
C) Do you like riding in the wet regularly? Get Metal
D) Do you strongly dislike brake noise? Get Resin (note that they are loud when wet)
E) Do you want to minimise the cost of bike parts? Get Metal

If you want to know more about pad compounds have a look at our article.

Systematically bedding in your brake pads before riding them is the best thing you can do to maximise braking performance. Below is a procedure for bedding in pads:

1) (Optional) If you are changing pad compound or brand: Clean your rotor with a non-residual cleaner like isopropyl alchohol. Use a very clean cloth, rag or paper towel.
2) Install pads
3) Install wheel
4) Check that your brake pads contact each side evenly when brakes are applied.
4) Pedal bike up to speed and apply your brakes with a consistent pressure (gently at first is best).
5) Take off brakes before you stop. Stopping fully ends up causing an uneven transfer of pad material which is what we are trying to avoid.
6) Repeat steps 4-5 ten to twenty times.

If you want to know more about bedding your pads in have a look at our article.

E-bikes are a lot heavier than normal bikes which makes them harder to stop. Compared to a lighter normal bike, to slow down in the same period of time requires pulling the brake levers harder and your brakes will get hotter. Although e-bikes have higher braking requirements, we don’t offer e-bike specific pads because we already offer our highest performing compounds. The best pad compound for you depends on your bike setup and preferences.

If your current brakes aren’t doing enough for you, consider the following situations and solutions:

A) If your brakes aren’t slowing you fast enough, consider installing some larger rotors to get more braking power.
B) If you use resin pads and your brakes lose power when hot, consider trying metallic pads.
C) If you use metallic pads and your brakes lose power when hot, consider installing larger rotors to get more braking power.

You can learn more about our pad compounds here.
You can learn more about brake fade here.

At very high temperatures brakes tend to lose performance (brake fade). The purpose of finned pads is to decrease brake fade through an increase in surface area for cooling. While they sound nice, we don’t offer finned pads because their performance gains are low compared to other solutions which cost you less in the long run.

The most effective solution for brake fade is increasing the size of your brake rotor which gives it a much larger surface area for cooling (significantly more than finned pads). Increasing the size of your rotor also provides you more power and reduces pad wear rate as well as the fatigue on your braking finger. Yes, even 203mm rotors aren't enough for a lot of us!

If you want to know more about the ins and outs of brake fade have a look at our article.

Shred Confidently

We guarantee all of our products and have always got your back

Swift Fulfillment

We hold inventory locally so your order should arrive quickly

Gravity certified

Developed by gravity riders who demand strong & reliable brakes

Customer Reviews

Based on 3 reviews
100%
(3)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
A
AL
MT5 - thumbs up

Works as intended. After burning them in the bite really well. Will easily buy again.

P
Paul Q.
Very happy - Will buy again

Very happy, would buy again. I've been running Frictive Metal pads in my Magura MT5 brakes for most of this year, dry & wet. Perform great, no fade & lasting well.
I may of benefited from hearing a Downtime Podcast before fitting these. The Magura technicians explained how to bed in new pads. Essentially 30 rapid slow downs from 25KPH, never quite stopping and in quick succession. They also explain how to bleed Maguras correctly to avoid that annoying brake rub.

n
njs50
Great alternative to factory pads

I switched my old Magura pads for these half way through the TA. They performed at least as well and are still going strong after > 2000km of riding. Would buy again without hesitation.